Re: Digital Neg Materials

From: Scott Wainer ^lt;[email protected]>
Date: 05/13/05-03:00:43 PM Z
Message-id: <003301c557fe$d5015070$55affea9@scottho3aakafr>

Hi Dan,

I use Westjet transapency from Westar Solution with Epson 1280's. One 1280
is setup with dye inks and the other with pigmented inks; both from It is recommended that you only print using black ink but I
find that printing grayscale with all colors give a smoother negative. I
haven't seen any puddleing though the transparencies take a day or two to
dry at 50% RH. Generally I dry them with a blowdryer on hot and they are
ready in minutes. Westar will also send samples if you call or email them.

Regards, Scott

----- Original Message -----
From: "dan jones" <>
To: <>
Sent: Friday, May 13, 2005 3:18 PM
Subject: Digital Neg Materials

> I was wondering what transparency materials (other
> than Pictorico Inkjet OHP) people have used to make
> their inkjet digital negs? Anyone used Epson, HP, Avery?
Received on Fri May 13 15:00:53 2005

This archive was generated by hypermail 2.1.8 : 06/02/05-10:12:02 AM Z CST