RE: Digital Neg Materials

From: joachim oppenheimer ^lt;[email protected]>
Date: 05/13/05-03:28:38 PM Z
Message-id: <AJEBJKDBBOEONEJDKJPHIECLCGAA.joachim2@optonline.net>

One of the problems with most of the transparent media for desktop digital
negatives has been the slow, and often incomplete, drying. Has anyone tried
Ansel Adams' test-print technique of using a microwave oven for controlled
drying? Joachim

-----Original Message-----
From: Scott Wainer [mailto:swphoto@verizon.net]
Sent: Friday, May 13, 2005 5:01 PM
To: alt-photo-process-l@sask.usask.ca
Subject: Re: Digital Neg Materials

Hi Dan,

I use Westjet transapency from Westar Solution with Epson 1280's. One 1280
is setup with dye inks and the other with pigmented inks; both from
inksupply.com. It is recommended that you only print using black ink but I
find that printing grayscale with all colors give a smoother negative. I
haven't seen any puddleing though the transparencies take a day or two to
dry at 50% RH. Generally I dry them with a blowdryer on hot and they are
ready in minutes. Westar will also send samples if you call or email them.

http://www.westarsolutions.com/vend/westar/westjet.html

http://www.inksupply.com

Regards, Scott

swphoto@verizon.net

----- Original Message -----
From: "dan jones" <cacadanebay@pacbell.net>
To: <alt-photo-process-l@sask.usask.ca>
Sent: Friday, May 13, 2005 3:18 PM
Subject: Digital Neg Materials

> I was wondering what transparency materials (other
> than Pictorico Inkjet OHP) people have used to make
> their inkjet digital negs? Anyone used Epson, HP, Avery?
>
Received on Fri May 13 15:29:28 2005

This archive was generated by hypermail 2.1.8 : 06/02/05-10:12:02 AM Z CST