Re: Coating Rod Basics

From: Rodolpho Pajuaba ^lt;>
Date: 11/23/04-10:31:13 AM Z
Message-id: <>

Loris Medici wrote:
> Go to neon sign makers... I guess you will be able to have them make
> tubes of adequate length and width. You can have them bend the ends in
> order to facilitate handling (or you can just glue some sort of holding
> tab to the tube using silicone).
> See the diagram with a tube with bent ends (handlers):
> \_______________/
> Regards,
> Loris.

Thatīs the coolest thing of a list, you read other peopleīs smart
solutions to questions that you were ashamed to ask. I had never thought
of neon sign makers, but they are the closest to these specific needs.
Currently I coat with a small glass rod, and I push and pull it with a
piece of EVA - after I had almost given up on glass coating, because I
couldnīt make an even coat on my first tries.
Rodolpho Pajuaba
Received on Tue Nov 23 10:31:37 2004

This archive was generated by hypermail 2.1.8 : 12/08/04-10:51:34 AM Z CST