RE: Coating Rod Basics

From: Loris Medici ^lt;>
Date: 11/23/04-10:11:25 AM Z
Message-id: <002a01c4d177$15d21760$ce02500a@altinyildiz.boyner>

Go to neon sign makers... I guess you will be able to have them make
tubes of adequate length and width. You can have them bend the ends in
order to facilitate handling (or you can just glue some sort of holding
tab to the tube using silicone).

See the diagram with a tube with bent ends (handlers):



> -----Original Message-----
> From: Michael Koch-Schulte []
> Sent: Tuesday, November 23, 2004 5:55 PM
> To:
> Subject: Coating Rod Basics
> I'm looking for some direction on building or buying coating
> rods for 8X10 work (pt/pd, cyano, VDB). Is there an
> off-the-shelf solution available that I can get from a
> hardware store? I was thinking of adapting an acrylic towel
> bar or similar, or am I wasting my time is glass the better
> way to go? What kind on local industries would carry glass
> rod? I don't have a lab supply company in my city.
Received on Tue Nov 23 10:05:57 2004

This archive was generated by hypermail 2.1.8 : 12/08/04-10:51:34 AM Z CST