Re: kitchen recipe for palladium

From: Clay ^lt;[email protected]>
Date: 05/08/05-02:41:33 PM Z
Message-id: <4D435DC8-733D-4B6C-ACFD-F12DFEBA6E42@wt.net>

Yeah, I realize that is the reason. I was talking about the
proportion by weight rather than by moles.
On May 8, 2005, at 3:23 PM, Eric Neilsen wrote:

> The proportions are the exact same; the weights are different because
> lithium and sodium have different atomic weights.
>
>
>
> Eric Neilsen Photography
> 4101 Commerce Street
> Suite 9
> Dallas, TX 75226
> http://e.neilsen.home.att.net
> http://ericneilsenphotography.com
>
>
>
>> -----Original Message-----
>> From: Clay [mailto:wcharmon@wt.net]
>> Sent: Sunday, May 08, 2005 8:50 AM
>> To: alt-photo-process-l@sask.usask.ca
>> Subject: Re: kitchen recipe for palladium
>>
>> Un-iodized salt is just fine. For the last few years , I have been
>> using Lithium chloride instead, and have been getting nice prints and
>> no signs of depression either. If you use LiCl, the proportions are
>> slightly different.
>>
>>
>> On May 8, 2005, at 8:45 AM, Christina Z. Anderson wrote:
>>
>>
>>> Thanks, Clay,
>>> Is it regular uniodized table salt or do I need some professional
>>> grade?
>>> I figured I should mix it at once because I can just imagine
>>> weighing out fine powder and sneezing...for some reason, the cost
>>> has me very nervous.
>>> Chris
>>>
>>> From: "Clay" <wcharmon@wt.net>
>>>
>>>
>>>> Those are the proportions I use. The proportions are probably more
>>>> important than the solution strength, especially if you take into
>>>> account the dilution that occurs automatically when you use the
>>>> Magic brush. If I were you, I would just mix it all up at once,
>>>> since it won't go bad or anything. That amount will make you
>>>> 300ml of solution:
>>>> 25g PdCl
>>>> 17.5g NaCl
>>>> 275ml water
>>>> Clay
>>>>
>>>>
>>>
>>>
>>>
>>>
>
>
Received on Sun May 8 14:42:10 2005

This archive was generated by hypermail 2.1.8 : 06/02/05-10:12:02 AM Z CST