RE: Print Clear Print on right side.

From: Don Bryant ^lt;>
Date: 03/02/05-10:22:56 PM Z
Message-id: <>


> Just wondering if folks are having this problem printing with Pt./Pd.
> whenu using a vacuum frame?

I quit using a vacuum frame with the UCF. Even when reducing the vacuum to 3
lbs. there seemed to be print emulsion transferred to the negative. The
mylar is probably a good idea especially with larger sheets as image will
probably be sharper with a vacuum easel with the mylar than when used with a
large contact printing frame.

Of course if you are using a NuArc 26k the contact printing frame probably
isn't an option.

Received on Wed Mar 2 22:23:02 2005

This archive was generated by hypermail 2.1.8 : 04/08/05-09:30:59 AM Z CST