Re: Print Clear Print on right side.

From: [email protected]
Date: 03/02/05-10:30:40 PM Z
Message-id: <>


I had the same problem with masking tape (the kind used for painting). I
accidentally laid the negative down emulsion side up to mask of the edges for
brush coating and... YIKES! It took both hands to get the "easy remove" tape
separated. I double check now!

Mark Nelson
Purchase the eBook & System for Your Own Custom Workflow@
Precision Digital Negatives
PDN's Own 31-Step Tablet Now Available—produced by Stouffer Industries
Credit Card & Paypal now accepted
Workshop info on Home Page

In a message dated 3/2/05 10:17:15 PM, writes:

> I have been using pictorico and have had no problem with negative
> flaking when using the vacuum frame during pt/pd printing. I did find
> out that using a One-Pass roller to clean a inkjet negative is a very
> bad idea. The roller sticks to it like glue. It is actually pretty
> amazing. I had to use a lot of force to separate the roller from the
> negative.
> Clay
Received on Wed Mar 2 22:30:59 2005

This archive was generated by hypermail 2.1.8 : 04/08/05-09:30:59 AM Z CST