Re: Crystal Clear Transparency

From: Loris Medici ^lt;[email protected]>
Date: 10/30/04-01:18:14 AM Z
Message-id: <002201c4be50$9f9b9050$bd02500a@Loris>

I always force dry with a hot air stream - and I print emulsion up (the
media is very thin, even thinner than lith/imagesetter films so there's not
a big sharpness loss IMO)... That way I can use the negatives 10 mins. after
printing. I don't know if it will help with 2200 inks but you should try the
hot air method and see if it helps... (don't try it with multi-layer prints,
the media definitely change shape if you treat with hot air by close range
for a long time)

Regards,
Loris.

----- Original Message -----
From: "Sandy King" <sanking@clemson.edu>
To: <alt-photo-process-l@sask.usask.ca>
Sent: Saturday, October 30, 2004 5:55 AM
Subject: Crystal Clear Transparency

>
> I am very, very pleased because the use of this material will save me a
> bundle over Pictorico. The only caveat is that you must allow a long time
> for the negatives to dry, or force dry them in some way.
>
Received on Sat Oct 30 01:18:33 2004

This archive was generated by hypermail 2.1.8 : 11/03/04-10:51:23 AM Z CST