[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: IPv6 tunnel
- From: [email protected] (Jason Bogin)
- Date: Thu, 2 Nov 2000 10:27:03 -0500
I have a sample Cisco IPv6 configuration on my web site when I did research
for the University of North Florida.
Go to http://www.jax-inc.com/IPv6
From: Keith Tang (HTHK - Engineer II, NW3G)
To: 'Kristoff Bonne'
Cc: [email protected]
Sent: 11/2/00 1:29 AM
Subject: IPv6 tunnel
Question on IPv6 tunnel
1.To setup 6to4 or 6over4 tunnel with 6bone end site should i have a
supported Router and Leased Line.
2.All our PCs host to connect Internet are using private IP,
from 3600 Cisco router generating by NAT,
Can I use Private IPv4 address to setup 6to4 tunnel with 6 bone end
3. If the answer is "No" for the question 2, then I must use a Real IP.
order to obtain a Real IP, I can choose one of the connections:
leased line (With a Router), PPPoE Dial up (NO router, 24 hours * 7
or 56k Dial Up Modem (No Router, for sure) .
Can I setup 6to4 tunnel by using PPPoE or 56k dial Up.
4. There are number of features in IPv6, Authentication and ESP,
Auto-configuration, RSVP, Flow Label. If we setup a tunnel with Cisco
6to4 or 6over4 how can I test those functionalities. Any O/S, Any
Any procedures, Any hacker program to test the Security in Ipv6