[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Deploying IPv6 XLAT64

> On 27 Sep 2018, at 4:22 am, Matt Hoppes <mattlists at rivervalleyinternet.net> wrote:
> Thanks... that is what I don't understand:  Why is NAT64 such a difficult concept to put into routers and firewalls?  We already do NAT with IPv4 just fine.

Itâ??s not s difficult concept but you need to remember NAT44 breaks stuff and NAT64/NAT46 breaks more stuff.

> I feel like IPv6 adoption would be much faster if there was a transition mechanism other than dual stacking.

Dual stacking is SIMPLE.  REALLY.  Turn on IPv6 with the M bit set and configure the DHCPv6 server.  If you donâ??t need that level of control of address assignments leave the M bit off.  99.99% of your machines will just add a second address to the interface without you having to do anything more.

> Think: Corporate offices.  Rather than renumbering everything inside, they just turn on NAT64 and now they can begin a slow and controlled transition.

Getting to IPv6 resources from IPv4 address is a *much* harder problem that getting to IPv4 resources from IPv6 which is what you are describing here with the â??no renumber everything as they already have a IPv4 addressâ?? requirement.  NAT64 allows IPv6 devices to get to legacy IPv4 servers.  To allow IPv4 devices to get to IPv6 servers you need to map the IPv6 addresses you want to talk to in to a pool of IPv4 addresses and push that mapping to a NAT46 (not NAT64) device. 

Go dual stack then, once IPv6 is stable, turn off IPv4 if you want to be single stacked.  You are then no longer dependent on the services you want want to access continuing to be offered over IPv4.  464XLAT will only work as a stop gap for IPv4 clients while services are offered over IPv4.  After ~20 years of IPv6 being available (Windows XP had IPv6 support and it was not the first major OS to have it) just turn on IPv6.

Mark Andrews, ISC
1 Seymour St., Dundas Valley, NSW 2117, Australia
PHONE: +61 2 9871 4742              INTERNET: marka at isc.org