[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Remote power cycle recommendations

On 4/27/2018 11:03 AM, William Herrin wrote:
> On Fri, Apr 27, 2018 at 11:46 AM, Andy Ringsmuth <andy at newslink.com> wrote:
>> Iâ??m sure many here are familiar with or using/have used devices to remotely power cycle equipment. Iâ??m considering a Dataprobe iBoot-G2 and am curious if youâ??ve had experience with it, or other recommendations.
>> I only need one outlet to be remotely power cycle-able. I have one piece of equipment that is occasionally a little flaky and, well, you know the hassle.
> The ancient (read: cheap used) APC AP9211's still get the job done.
> Regards,
> Bill Herrin

Def can't recommend the AP9211s enough to people needing remote power 
control.  You should be able to put the more modern AP961X series of 
cards in it as well.  The AP9617 is the basic module, the 9619 has 
environmental monitoring, and the 9618 has both the environmental stuff 
plus an analog modem.

The management modules can be reloaded with various types of firmware to 
make them compatible with everything from the rack mount PDUs to 
Symmetras and the run of the mill desktop or rack mount UPSs.

Brielle Bruns
The Summit Open Source Development Group
http://www.sosdg.org    /     http://www.ahbl.org