[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Vpn tunnel Asa 5505 to fortigate 60c

Almost all firewalls support NAT-T, which allows for using a private IP
address on the "outside" of the firewall (which is translated to a
routable public IP address before it gets on the Internet).  You will need
UDP 500 (for IKE) and UDP 4500 (for IPsec NAT-T) open, so no devices
between the firewalls can block those ports.  I know the ASA supports
this, because I have setup customers with "private" IP addresses on their
ASAs in certain circumstances.  I'm not familiar enough with the Fortinet
equipment, but you may need to turn on a NAT-T feature.


Fred Reimer

On 5/18/13 11:13 AM, "akurenath" <akurenath at hotmail.com> wrote:

>Hi nanog,
>I have a fortigate 60c connecting a vpn tunnel to an asa 5505. I have the
>connection setup,  but it will not connect because unfortunately the isp
>at the fortigate end decided to give us a 192.168.13/24 address. Now what
>I'd like to know is if there is any way to get this vpn connection to
>work through a pat connection until the isp resolves this issue?
>Thank you for any help.
>Sent from Samsung mobile