[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Why do some providers require IPv6 /64 PA space to have public whois?
- Subject: Why do some providers require IPv6 /64 PA space to have public whois?
- From: marka at isc.org (Mark Andrews)
- Date: Sun, 09 Dec 2012 08:03:25 +1100
- In-reply-to: Your message of "Sat, 08 Dec 2012 00:20:05 MDT." <[email protected]om>
- References: <[email protected]om> <[email protected]om>
In message <CAAAwwbUbWwK09vPfLJ89HyiupP5pP7ZypBhAbM4WMhFHe-=XWw at mail.gmail.com>,
Jimmy Hess writes:
> On 12/7/12, Constantine A. Murenin <mureninc at gmail.com> wrote:
> It seems you have an issue with the automated system of one provider
> in your RIR service region. This is unusual, I think; for the
> provider to not ask what NIC handle, or WHOIS detail should be
> listed for an assignment.
> I would suggest calling up the provider, and attempt to work out a
> solution with them where you get a /64, and the contact you want
> listed in WHOIS.
> The provider suballocating a block of IP addresses, can obviously
> apply additional policy to them -- such as additional requirements
> on what is shown in WHOIS.
> However, you can pick a different provider if necessary......
It's also more than likely a hold over of IPv4 think where, generally,
only companies are allocated address blocks. I would be ringing
the ISP and talking to the staff escalating until you get to someone
who understands the issue. Also a /64 is ridiculously small for a
company and it really too small for individuals so it very much
looks like this ISP hasn't applied enough thought to this area.
Trail blazing is hard work but someone has to do it.
Mark Andrews, ISC
1 Seymour St., Dundas Valley, NSW 2117, Australia
PHONE: +61 2 9871 4742 INTERNET: marka at isc.org