[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Switch with 10 Gig and GRE support in hardware.

Those are the two options I am looking at now. Unfortunately both of those require the chassis tax and a decent amount of real estate and power. It looks like that is what I am going to be stuck with though because I can't seem to find anyone that has small 1-2U solution that can do the full shake and bake.

-----Original Message-----
From: Joel Jaeggli [mailto:joelja at bogus.com] 
Sent: Saturday, February 19, 2011 7:51 PM
To: Mikael Abrahamsson
Cc: nanog at nanog.org
Subject: Re: Switch with 10 Gig and GRE support in hardware.

On 2/19/11 5:46 PM, Joel Jaeggli wrote:
> On 2/19/11 5:31 PM, Mikael Abrahamsson wrote:
>> On Fri, 18 Feb 2011, Matt Newsom wrote:
>>>                I am looking for a switch with a minimum of 12 X 10GE
>>> ports on it, that can has routing protocol support and can do GRE in
>>> hardware. Does anyone have a suggestion that might fit. Keep in mind I
>>> am looking for something in the 1-2U range and not a chassis.
> juniper mx80 can get 12x10GB using 2x 4x10Gb mics mx platform does gre
> in hardware.

appologies it appears only the 2 x 10Gbe mic is supported, so that's 8...

>> I'd imagine there is no such beast right now. Only one that comes to
>> mind is the 6500/7600 but there is no fixed-configuration small box that
>> fits your port needs, you need a 7604 to get that amount of ports.

Confidentiality Notice: This e-mail message (including any attached or
embedded documents) is intended for the exclusive and confidential use of the
individual or entity to which this message is addressed, and unless otherwise
expressly indicated, is confidential and privileged information of Rackspace.
Any dissemination, distribution or copying of the enclosed material is prohibited.
If you receive this transmission in error, please notify us immediately by e-mail
at abuse at rackspace.com, and delete the original message.
Your cooperation is appreciated.