Fume hood

From: Best, Dianne ^lt;[email protected]>
Date: 10/28/05-11:51:36 AM Z
Message-id: <51ABFBF1DF07AA4384B3E1BCC0A93C7801DC2E50@MHMAIL03.hydro.mb.ca>

There was a post awhile ago about fume hoods and I didn't have a chance
to respond to it at the time.
I have recently gone into wet plate collodion and built a fume hood
after researching everything I could find online. The exhaust is a 6"
two-speed duct fan with a high speed of 350 CFM. The chamber is about
36W x 24D x 26H I did a smoke test and changed from the original 4"
80CFM fan to the larger. With this fan, there was no escaping smoke if
the source was at least 1" back from the opening.
I have been using ether compounds in this fume hood and there is
absolutely NO ether smell in the house. With an L.E.L. of 0.9%, I didn't
want ether floating around uncontrolled!
The Wet Plate section of the darkroom is shown about half way down the
aka Calamity Jane
Received on Fri Oct 28 11:59:42 2005

This archive was generated by hypermail 2.1.8 : 11/07/05-09:46:19 AM Z CST