Re: Digital Neg Materials

From: dan jones ^lt;[email protected]>
Date: 05/14/05-04:24:28 PM Z
Message-id: <20050514222428.67518.qmail@web81810.mail.mud.yahoo.com>

scott
many thanks for the tip...i'll call them and get a
sample
dan
--- Scott Wainer <swphoto@verizon.net> wrote:
> Hi Dan,
>
> I use Westjet transapency from Westar Solution with
> Epson 1280's. One 1280
> is setup with dye inks and the other with pigmented
> inks; both from
> inksupply.com. It is recommended that you only print
> using black ink but I
> find that printing grayscale with all colors give a
> smoother negative. I
> haven't seen any puddleing though the transparencies
> take a day or two to
> dry at 50% RH. Generally I dry them with a blowdryer
> on hot and they are
> ready in minutes. Westar will also send samples if
> you call or email them.
>
>
http://www.westarsolutions.com/vend/westar/westjet.html
>
> http://www.inksupply.com
>
> Regards, Scott
>
> swphoto@verizon.net
>
>
>
>
> ----- Original Message -----
> From: "dan jones" <cacadanebay@pacbell.net>
> To: <alt-photo-process-l@sask.usask.ca>
> Sent: Friday, May 13, 2005 3:18 PM
> Subject: Digital Neg Materials
>
>
> > I was wondering what transparency materials (other
> > than Pictorico Inkjet OHP) people have used to
> make
> > their inkjet digital negs? Anyone used Epson, HP,
> Avery?
> >
>
>
>
Received on Sat May 14 16:24:38 2005

This archive was generated by hypermail 2.1.8 : 06/02/05-10:12:02 AM Z CST