Re: Gum Chemicals - starting out question

From: DWAYNE SANDALL ^lt;[email protected]>
Date: 09/09/04-12:39:49 PM Z
Message-id: <>

Thanks for the feedback, this is exactly the type of information I was seeking. One followup question though, is the exposure time going to be different for the two types of gum? and other than the issue with mixing colours, is there any other issues I should be aware of? I am planning on using a metal halide light source.

Thanks again,

Dwayne Sandall
"It is not because things are difficult that we do not dare; it is because we do not dare that they are difficult." Seneca
----- Original Message -----
From: Katharine Thayer <>
Date: Wednesday, September 8, 2004 12:15 pm
Subject: Re: Gum Chemicals - starting out question
> Judy Seigel wrote:
> > 
> > On Wed, 8 Sep 2004, Katharine Thayer wrote:
> > 
> > > Perhaps I'm assuming too much in assuming that the B&S kit 
> contains> > their best gum; you should probably ask just to be 
> sure, because they do
> > > also carry a lower grade of gum, or did last time I looked.
> >
> > 
> > I'm curious abo
ut this concept of "best gum."  
> By "best gum" with respect to B&S I simply meant their most expensive
> gum, the purest gum they carry, nothing more than that.
> kt
Received on Thu Sep 9 13:21:21 2004

This archive was generated by hypermail 2.1.8 : 10/01/04-09:17:55 AM Z CST