RE: Problem with Ultrafine Clear Film

From: Don Bryant ^lt;[email protected]>
Date: 05/29/04-11:23:33 PM Z
Message-id: <>



One more thought, rotate the U.C.F. 90 degrees and make another print. If
the direction of the stripes rotate I would definitely say you have
defective material.


Don Bryant




From: Mike Klemmer []
Sent: Saturday, May 29, 2004 11:37 PM
Subject: Problem with Ultrafine Clear Film


I printed some test curves onto U.C.F. that I recently purchased, Epson
2200 printer. I got some weird, splotchy lines on the film. I then printed
the same image onto paper to make sure it wasn't a printer
problem....everything A-OK there. I printed again on the U.C.F. - same
exact problem.


You can see a sample of the problem here:



Any thoughts?




Michael Klemmer
Received on Sat May 29 23:24:05 2004

This archive was generated by hypermail 2.1.8 : 06/04/04-01:20:54 PM Z CST