RE: Some temperaprint questions - beware! these are dummy,beginners questions

From: Loris Medici ^lt;>
Date: 02/05/04-06:46:18 AM Z
Message-id: <003601c3ebe6$1174ab50$ce02500a@altinyildiz.boyner>


> -----Original Message-----
> From: pete []
> Sent: Thursday, February 05, 2004 2:29 PM
> To:
> Subject: Re: Some temperaprint questions - beware! these are
> dummy,beginners questions
> Your first print looks just as it should !! maybe slightly
> thin but this is proberly due to the fact that you are using
> the back side of the RC paper.Which has no surface texture

Actually I'm not finished with it yet; what you see is only two coats. I
plan to make at least 3 more coats (I'm using a quite light pigment - in
the last layer, I plan to mix a heavy pigment and expose short around
1/3 time compared the previous layers for good shadow density)

> and therefore tends to print slightly lighter than Yupo but
> at this stage it is of no matter.

Yes, this is print is just for "practice" and learn how it looks like
and how it feels like...

> Well done Loris,

Thanks, will practice more and try to make satisfactory mono prints
before trying color... (and I'm a nitpicker, a person not easily
pleased: it may take a looong time before I start color work). What's
most important is that now, I believe I can do it :)

Received on Thu Feb 5 06:42:29 2004

This archive was generated by hypermail 2.1.8 : 03/02/04-11:35:07 AM Z CST