Re: UV exposure light boxes

Date: 02/03/04-04:56:24 PM Z
Message-id: <>


How hard is it to build a UV bank that incorporates an integrator? Is the
hardware for the integrator readily available and/or expensive?

Mark Nelson

In a message dated 2/3/04 12:11:00 PM, sanking@CLEMSON.EDU writes:

> I would recommend a vacuum easel with either the
> UV bank of MH light, though you might be able to
> get away with a well adjusted printing frame with
> the  HID lamp because it functions more like a
> point source. To counter this, you can get fairly
> decent consistency in exposures with the UV bank
> without a light integrator. With the platemaker
> you will get both light integration and vacuum
> easel built in.
Received on Tue Feb 3 16:57:01 2004

This archive was generated by hypermail 2.1.8 : 03/02/04-11:35:07 AM Z CST