RE: hanging a show on brick

From: Gerry Giliberti ^lt;[email protected]>
Date: 08/02/04-06:25:30 AM Z
Message-id: <91614AC5612CD611BDC500062970ACDF01D4603B@EXCHANGE_SERV>

If you can attach a metal or wood rail/moulding along the beams you can
connect S-hooks to it and then to black chains (Home Depot carries it) and
then use S-hooks in the chains eyeholes below to hold the wired prints.
Using the moulding/rail you can position the pictures where every you want
by pushing the S-hooks along gthe rail. Otherwise you've got to drill.

-----Original Message-----
From: Christina Z. Anderson []
Sent: Thursday, July 29, 2004 6:33 PM
Subject: hanging a show on brick

Hi all,
     What is the best way to hang a show on a brick wall (e.g. old
warehouse, now converted) that is 50 ft long....there are beams about 13
feet high that can be eye-bolted and wires strung down, but there has got to
be a simpler way than screwing in 100 eye bolts and getting wires to hang
evenly. Any ideas?
Received on Mon Aug 2 06:25:00 2004

This archive was generated by hypermail 2.1.8 : 09/14/04-09:17:56 AM Z CST