[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[ale] Compilation problems



See http://www.bitwizard.nl/sig11/ .

~Randy

> -----Original Message-----
> From: Glenn C. Lasher, Jr. [mailto:glasher at dtassoc.com]
> Sent: Monday, January 04, 1999 7:20 AM
> To: Atlanta Linux Enthusiasts
> Subject: [ale] Compilation problems
> 
> 
> 
> Okay, here's the situation:
> 
> Brand new computer (generic).  It has a 4.3GB HDD, 200MHz 
> Pentium-MMX, 32X
> generic ATAPI CD-ROM, 32MB of RAM.
> 
> I installed slackware 3.2 on this system, and in another attempt,
> Slackware 3.5  Both yielded this result:
> 
> I went into /usr/src/linux, did a make config, make dep, make 
> clean, make
> zImage, and the compilation stops right after floppy.o with a 
> signal 11.
> 
> I was able to take the HDD out of this machine and put it into another
> machine (a Pentium 100) and compile the kernel with no difficulties at
> all.
> 
> My basic question is what is a Signal 11 and what am I 
> missing here?  I
> have done this installation a million times (okay, not literally) and
> never encountered this one.  Any ideas?
> 
> Many thanks to all.
> 
> --------------------------------------------------------------
> -----------
> Glenn C. Lasher, Jr - Senior Engineer, Windows 
> NT/UNIX/Telecommunications
> Data Tech Associates, Ltd, 883 Broadway, Albany NY, 518.465.1190
> 
>