Extending network over a dry pair

[mel at beckman.org (Mel Beckman)]

Iâ??ve used the Patton copper link devices such as the one you mentioned Nick, and they work very well within the parameters they cover. Their tech-support is excellent also.

 -mel beckman

On Dec 12, 2018, at 1:44 PM, Josh Luthman <josh at imaginenetworksllc.com<mailto:josh at imaginenetworksllc.com>> wrote:

Something LRE possibly.  Could just do VDSL.

Are you just looking at more than 1544 kbps or is there a particular threshold you need to meet (to support a camera, etc)?

Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373


On Wed, Dec 12, 2018 at 4:26 PM Nick Bogle <nick at bogle.se<mailto:nick at bogle.se>> wrote:
A quick question for you guys;

If you had a single dry pair (pair of copper wires originally for phones) to a remote site that was around 6 miles away, what would you use? We currently are just extending a T1 line to this site, but 1.5Mbps isn't cutting it anymore. Unfortunately it's a research site on a federally protected wildlife preserve so we can't run any new infrastructure (fiber etc) and it isn't in a geographical place where point to point wireless is practical. We were thinking there is some sort of network extender that uses some form of DSL for higher bandwidth capacity.

Any suggestions?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.nanog.org/pipermail/nanog/attachments/20181212/8f95d98f/attachment.html>