Extending network over a dry pair

[jhaustin at gmail.com (Jeremy Austin)]

For a comparison of distance to capacity on copper, see
http://www.impulse-corp.co.uk/knowledge-base/transmission-distance-and-speed-differences-between-shdsl-and-vdsl2.htm

You might be able to pair bond -- if you had more than one pair.

If wireless isn't possible, you're likely needing satellite.

On Wed, Dec 12, 2018 at 12:35 PM Andrew Latham <lathama at gmail.com> wrote:

> On Wed, Dec 12, 2018 at 3:27 PM Nick Bogle <nick at bogle.se> wrote:
>
>> A quick question for you guys;
>>
>> If you had a single dry pair (pair of copper wires originally for phones)
>> to a remote site that was around 6 miles away, what would you use? We
>> currently are just extending a T1 line to this site, but 1.5Mbps isn't
>> cutting it anymore. Unfortunately it's a research site on a federally
>> protected wildlife preserve so we can't run any new infrastructure (fiber
>> etc) and it isn't in a geographical place where point to point wireless is
>> practical. We were thinking there is some sort of network extender that
>> uses some form of DSL for higher bandwidth capacity.
>>
>> Any suggestions?
>>
>
> Look for an SHDSL Ethernet Extender
>
> --
> - Andrew "lathama" Latham -
>


-- 
Jeremy Austin
jhaustin at gmail.com

(907) 895-2311 office
(907) 803-5422 cell
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.nanog.org/pipermail/nanog/attachments/20181212/09879f17/attachment.html>