[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Perspectives about customer M/A/C in triple play environments

While it's possible I've never seen a mainstream ISP offering tripleplay
services (or even doubleplay) where the ATA isn't embedded in the CPE (eMTA

As far as IPTV, at least the way UVerse does it the video traffic is all
untagged on the customer side, the gateway may try to do some QoS but this
allows you to plug a UVerse box in anywhere Ethernet works, along with
MoCA. This is simple, and kind of just works.

*Spencer Ryan* | Senior Systems Administrator | sryan at arbor.net
*Arbor Networks*
+1.734.794.5033 (d) | +1.734.846.2053 (m)

On Mon, May 16, 2016 at 8:09 PM, Jason Lixfeld <jason+nanog at lixfeld.ca>

> Hello,
> I think it?s fair to say that most broadband/FTTx customers don?t have to
> think very much or need to have a very high degree of understanding if they
> want to move their wired Internet device from one room or another in their
> house.
> Maybe to keep things simple, let?s assume that we?re talking about a
> relatively modern MDU unit where a customer has some sort of provider CPE
> in their in-suite telecom demark closet/box/what have you with some number
> of switched 'LAN? ports on it, and each of those LAN ports would be wired
> to a wall jack somewhere.  Mr. or Ms. User can move their Internet device
> anywhere there is a wall jack and Bob?s your uncle.
> My question is around how this landscape changes in triple play
> environments.  As I understand it, most triple play deployments separate
> (in some cases VoIP,) TV and Internet traffic onto VLANs (Internet would be
> presented to the customer untagged).  The CPE would then allow the ISP to
> switch the video traffic onto a coax port, or maybe onto the CPE?s embedded
> switch, or maybe both.  For the sake of argument, let?s assume the provider
> is supplying an Ethernet based set-top-box, so customer should be able to
> connect the STB to any wall jack and it should just work.  And they should
> be able to connect their provider supplied ATA to any wall jack, and it
> should just work.  And they should be able to connect their Internet device
> to any wall jack and it should just work.
> Or should it?
> Are most CPEs that are provided by ISPs sophisticated enough to be able to
> put all service tags on all ports, and have those same ports act as
> untagged LAN ports as well?  If not, how do providers deal with this?  Do
> they dedicate one port for an IPTV STB?  One port for an ATA (assuming no
> built-in POTS on the CPE)?  And the rest of the ports for untagged
> Internet?  What if the customer has 2+ TVs?  Do they need to call in and
> have the provider remote in and provision another port for TV at the
> expense of some other service that might be running on that port already?
> Do they need to install a switch that does IGMP snooping?
> I feel like this all has the potential to become very complicated for the
> customer, and maybe the provider and their installers.  To me, the customer
> should continue to be dumb and unassuming.  They should be able to put
> whatever they want wherever they want and have it just work.  Is that how
> things actually are in the real world or are customers and providers making
> silent sacrifices for the sake of all this new fangled technology?