[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
DHCPv6 PD & Routing Questions
On 2015-11-21 05:08, Dave Taht wrote:
> y'all might want to look over the work of the ietf homenet working
> group for some insight into plans for dhcp-pd, and routing
> interactions, in the home and small business, at least.
> some dhcpv6 specific info is spread around using the new hncp protocol.
> blatant plug - https://github.com/sbyx/odhcp6c is now the best open
> source dhcpv6 (and pd) client "out there" right now IMHO.
> Dave T?ht
> Let's go make home routers and wifi faster! With better software!
> On Sat, Nov 21, 2015 at 11:13 AM, Frederik Kriewitz
> <frederik at kriewitz.eu> wrote:
>> On Fri, Nov 20, 2015 at 10:35 PM, Jim Burwell <jimb at jsbc.cc> wrote:
>>> 2) What are the most common ways of managing the routing of delegated
>>> prefixes in the ISPs routing domain? Has a standard method/best
>>> practice emerged yet? Routing protocols? IPv6 RAs?
>>> One obvious answer would be routing protocols. In my brief googling,
>>> I've seen a forum post that seems to indicate that Comcast makes use of
>>> RIPng on their CPE to propagate routing information for prefixes
>>> delegated to it. Can someone confirm this? This would seem as good a
>>> method as any to do this, albeit with obvious security concerns.
>> We've build a small tool which watches the dhcpd6 lease file for
>> changes and injects the PD routes using exabgp (iBGP session with
>> corresponding IA_NA address as next-hop for the IA_PD prefix).
>> Best Regards,
>> Frederik Kriewitz
Thanks for all the replies.
The gist I get is that no real SOP/BCP has emerged yet for doing this,
and everyone is home-brewing their own methods.
One of the other reasons I ask is because I was experimenting with
Comcast Business IPv6. I was sent a cable modem that could do
dual-stack and did PD. But it seemed really broken. It would only
assign a /64, and never routed anything it assigned back to the head end
as far as I could see through the customer interface. I was told that
the firmware was broken.