[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

A9K-MPA-20X1GE in ASR9001



I don't have any GBIC/SPF inserted in it right now, it just turn off
whole module. So won't allow me even fpd upgrade.

On 25/10/13 14:02, Ray Ludendorff wrote:
> 
> 
> It means that you did not purchase a original Cisco GBIC for the interface ..
> Therefore it will not be TAC supported if you have problems with the interface.
> There is a command to override this error and still use the interfaces.
> 
> Sent from mobile device
> 
>> On Oct 25, 2013, at 11:56, "Nikolay Shopik" <shopik at inblock.ru> wrote:
>>
>> Hey, anyone had issues with A9K-MPA-20X1GE in ASR9001?
>>
>> It get disabled for us after 20 seconds finishing initialization, with
>> such message.
>>
>> %PLATFORM-SCC-2-BAD_ID_HW : Failed Identification Test in 0/130/0 [1/0]
>> The module in 0/130/0 in this router may not be a genuineCisco product.
>>
>>