[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Cisco 6509 SUP32 SNMP Meltdown With CatOS
- Subject: Cisco 6509 SUP32 SNMP Meltdown With CatOS
- From: mhuff at ox.com (Matthew Huff)
- Date: Fri, 2 Nov 2012 17:10:17 -0400
- In-reply-to: <[email protected]om>
- References: <[email protected]om>
By any chance were you querying a Sup32 that had BGP full routes? That and other large tables can easily swamp the cpu on the Sup32.
This technote is based on IOS, and I don't know if the same facilities exist in CatOS, but as Nick mentioned, run, don't walk and convert to IOS. CatOS is dead.
http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a00800948e6.shtml
-----Original Message-----
From: david peahi [mailto:davidpeahi at gmail.com]
Sent: Friday, November 02, 2012 2:37 PM
To: nanog at nanog.org
Subject: Cisco 6509 SUP32 SNMP Meltdown With CatOS
Anyone have experience with Cisco 6509E/SUP32 crashing under heavy SNMP
polling load, causing high cpu utilization and 6509 lockup, requiring 6509
reboot? CatOS is deployed. Is the behavior any different with 6509 IOS?
David