[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Why do some providers require IPv6 /64 PA space to have public whois?
In message <272782D1-8DEA-4718-9429-8B0505DD30BD at delong.com>, Owen DeLong write
> Sent from my iPad
> On Dec 10, 2012, at 3:02 PM, Mark Andrews <marka at isc.org> wrote:
> > In message <50C65C84.6080203 at dougbarton.us>, Doug Barton writes:
> >> On 12/10/2012 01:27 PM, Schiller, Heather A wrote:
> >>> I think most folks would agree that, IPv4 /32 :: IPv6 /128 as IPv4 /29 :=
> : I
> >> Pv6 /64
> >> Quite the opposite in fact. In IPv6 a /64 is roughly equivalent to a /32
> >> in IPv4. As in, it's the smallest possible assignment that will allow an
> >> end-user host to function under normal circumstances.
> >> SWIP or rwhois for a /64 seems excessive to me, FWIW.
> >> Doug
> > Even SWIP for a /48 for a residential assignment is excessive.
> > SWIP for a /48 for a commercial assignment is reasonable
> I disagree. SWIP for a /48 with the appropriate notations under residential c
> ccountability of resource utilization and privacy concerns for residential c=
> ustomer assignments.
You don't SWIP each residential customer with IPv4. You often SWIP blocks
of residential customers down to the pop level.
You often SWIP each commercial customer with IPv4.
To require a SWIP entry for each residential customer is bureaucracy
gone mad. Additionally there is no technical need for this. It
isn't needed for address accountability. Residential customers
have historically been treated in bulk.
Mark Andrews, ISC
1 Seymour St., Dundas Valley, NSW 2117, Australia
PHONE: +61 2 9871 4742 INTERNET: marka at isc.org