[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
SFP vs. SFP+
On Thu, Feb 17, 2011 at 03:41:28PM -0800, Sam Chesluk wrote:
> Depends on the switch. Some, like the 2960S and 4948E, have 1G/10G
> ports. They will, however, not operate at 4Gbps (that particular speed
> was chosen to allow the core components to work for gigabit Ethernet,
> OC48, 2G FC, and 4G FC).
4G SFPs are relatively rare, and only for fibre channel. Multi-rate SFPs
that do up to 2.5G (for OC48) are a lot more common, but they cost more
than just a simple 1GE SFP. Since all you can do with Ethernet is 1G or
10G anyways, "most" SFPs you'll encounter in the field will be the
cheaper non-multirate kind.
For more information about SFP+, as well as some comparisons between
different 10G optic types, take a look at:
As an update (since this presentation is from Feb 2008), SFP+ is just
now finally starting to get into 40km/ER reach territory. Supplies are
limited, as they just very recently started shipping, but they do exist.
Of course since they moved the electronic dispersion compensation (EDC)
off the optic and onto the host board, the exact distances you'll be
able to achieve are still based on the quality of the device you're
plugging them into. SFP+ is still mostly an enterprise box or high
density / short reach offering, and XFP is still required for full
Richard A Steenbergen <ras at e-gerbil.net> http://www.e-gerbil.net/ras
GPG Key ID: 0xF8B12CBC (7535 7F59 8204 ED1F CC1C 53AF 4C41 5ECA F8B1 2CBC)