[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
real hardware router VS linux router
Not sure if this has already been mentioned, but what about solid state
hard drives? Think they are in the high GB capacity now and solves the
problem of no moving parts?
Although I'm all for hardware based devices, we recently been to Cisco
to see the new Cisco ASR1000 switch uses an underlying Linux kernel :o
Stephen Bailey - Senior Lead Systems Engineer
Network Operations - ISP & DSL
Fujitsu Services Limited, Registered in England no 96056, Registered
Office 22 Baker Street, London, W1U 3BW
This e-mail is only for the use of its intended recipient. Its contents
are subject to a duty of confidence and may be privileged. Fujitsu
Services does not guarantee that this e-mail has not been intercepted
and amended or that it is virus-free.
From: Brandon Galbraith [mailto:brandon.galbraith at gmail.com]
Sent: 20 February 2009 00:02
Cc: nanog at nanog.org
Subject: Re: real hardware router VS linux router
On 2/19/09, mike <mike-nanog at tiedyenetworks.com> wrote:
> Steve Bertrand wrote:
>> Ryan Harden wrote:
>>> While you could probably build a linux router that is just as fast
>>> real hardware router, you're always going to run into the moving
>>> part of the equation.
>> Not if you boot directly from USB key into memory with no disk drive.
> I am sorry, but this is wrong. A USB Key is another 'PC Architecture'
> DOES NOT WORK for network devices. There is NO positive mechanical
> keep that thing inserted, and the way a USB Key would hang off most
> with a USB port, would put it at very high risk for being accidentally
> bumped / disconnected. Secondly, there are still many many PC
> boxen that still do not boot correctly from USB.
I've used a hot glue gun to glue a USB key to the device/server/etc in
question. Works very well against being bumped or accidentally
Email: brandon.galbraith at gmail.com