[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
anyone knows about extreme switch
The default user name is admin and there is no password.
From: ann kok [mailto:oiyankok at yahoo.ca]
Sent: Friday, February 13, 2009 5:31 PM
To: nanog at nanog.org; LEdouard Louis
Subject: RE: anyone knows about extreme switch
it works properly
Do you know the default pw?
Thank you again
--- On Fri, 2/13/09, LEdouard Louis <LEdouard at edrnet.com> wrote:
> From: LEdouard Louis <LEdouard at edrnet.com>
> Subject: RE: anyone knows about extreme switch
> To: oiyankok at yahoo.ca, nanog at nanog.org
> Received: Friday, February 13, 2009, 4:11 PM
> We use Extreme products, but use telnet or SSH behind
> Can you use telnet? It provide more flexibility, but SSH is
> more secure
> Regardless of the connection the CLI configuration is the
> HyperTerminal setting?
> Baud rate-9600
> Data bits-8
> Stop bit-1
> Flow control-XON/XOFF
> Cable: Null-Modem RS-232 (9 pin to 25 pin)
> Good luck!
> -----Original Message-----
> From: ann kok [mailto:oiyankok at yahoo.ca]
> Sent: Friday, February 13, 2009 3:31 PM
> To: nanog at nanog.org
> Subject: anyone knows about extreme switch
> I have old model extreme switch
> Anyone knows about hyperterminal setting.
> ls null modem cable same as HP serial cables?
> I try both cables in this switch and can see the boot
> but keyboard is not responsing !
> Thank you
> Looking for the perfect gift? Give the gift of Flickr!
Instant Messaging, free SMS, sharing photos and more... Try the new
Yahoo! Canada Messenger at http://ca.beta.messenger.yahoo.com/