Re: DIY Fume Hood

From: Michael Koch-Schulte ^lt;[email protected]>
Date: 10/25/05-08:09:08 PM Z
Message-id: <003a01c5d9d2$3fa9a850$0100a8c0@TRASHO>

Dear list. I found this excellent paper/site on the evolution of the fume
hood. A MUST READ if you're considering creating a ventilation system. Many
references for further reading too. It seems there's more to designing a
good fume hood than one would think. Particularly interesting were the many
subtleties in design shapes. My conclusion is that if you think an old range
hood going to protect you think again.

http://www.saai-svc.com/technotesarticles/evolution.htm
http://www.saai-svc.com/technotesarticles/technotes_intro.htm

~m

----- Original Message -----
From: "Judy Seigel" <jseigel@panix.com>
To: <alt-photo-process-l@sask.usask.ca>
Sent: Monday, October 24, 2005 7:54 PM
Subject: RE: DIY Fume Hood

>
>
> On Sun, 23 Oct 2005, Robert W. Schramm wrote:
>
> > Michael,
> >
> > I built my own fume hood about 5 years ago. I started with a large
darkroom
> > exhaust fan designed to exhaust a 12 x 12 ft darkroom. I found a
"sample"
> > storm window about 2 ft x 4 ft with sliding
>
> ... see also small photo with instructions page 10 & 11 Post-Factory #4,
> with more Schrammeraniana on Dag.
>
> J.
Received on Tue Oct 25 20:09:25 2005

This archive was generated by hypermail 2.1.8 : 11/07/05-09:46:19 AM Z CST