From: Fabiano Busdraghi ^lt;[email protected]>
Date: 10/13/05-01:42:38 AM Z
Message-id: <>

I also use the liquid on top. Mixing the solution just before coating I had a
grainy and uneven result.

--- "Weber, Scott" <> ha scritto:

> Thanks for all of the replies, I think I isolated the problem. I was
> storing
> the coated paper under plastic containers that were not light tight. The
> paper was exposed to small doses of florescent light for several hours. I
> do
> have another question about the precipitate that forms in the solution.
> Should I mix that into a suspension before coating or is it best to let it
> settle and just use the liquid on top?
> Thanks,
> Scott B. Weber
> Associate Professor of Photography
> Department of Fine Arts
> Barry University
> 11300 NE 2nd Avenue
> Miami Shores, Florida 33161
> (305) 899 4922
> -----Original Message-----
> From: []
> Sent: Tuesday, October 11, 2005 8:26 PM
> To:
> Subject: Re: (no subject)
> I have used very old VDB solution succesfully, although little flakes of
> silver seem to precipitate out of the solution.
> Rob
> The information transmitted is intended only for the person or entity to
> which it is addressed and may contain confidential, and/or privileged
> material. No confidentiality or privilege is waived or lost by any errant
> transmission. If you receive this message in error, please immediately
> delete it and all copies of it from your system and notify the sender.
> E-mail transmission cannot be guaranteed to be secure or error-free as
> information could be intercepted, corrupted, lost, destroyed, arrive late
> or incomplete, or contain viruses.
> Barry University - Miami Shores, FL (

GuIT, TeX, LaTeX:


Yahoo! Mail: gratis 1GB per i messaggi e allegati da 10MB
Received on Thu Oct 13 01:42:52 2005

This archive was generated by hypermail 2.1.8 : 11/07/05-09:46:18 AM Z CST