Re: How Much PMK

From: SteveS ^lt;[email protected]>
Date: 10/02/05-09:44:22 PM Z
Message-id: <011c01c5c7cc$bf528800$4802280a@VALUED65BAD02C>

It's always one ounce per 10 square inches. So, an eight by ten would
require eight ounces of developer.

S.
----- Original Message -----
From: "Jeffrey D. Mathias" <jeffrey.d.mathias@att.net>
To: "alt-photo-process list" <alt-photo-process-l@usask.ca>
Sent: Sunday, October 02, 2005 11:37 AM
Subject: How Much PMK

> One nice thing about this list is a lot of wheels have already been
> invented.
>
> It would be appreciated if someone familiar with PMK could tell me how
> much total volume of rolo PMK are required to develop a typical 8x10 film
> using a tube. The concern is to not deplete the developer so as to get
> consistent results no mater the densities on the film. I currently tray
> develop with 1030 ml PMK (10-20-1000) per each 8x10 and have not checked
> the capacity.
>
> Thank you in advance.
>
> --
> Jeffrey D. Mathias
> http://home.att.net/~jeffrey.d.mathias/
>
>
>
Received on Sun Oct 2 21:44:34 2005

This archive was generated by hypermail 2.1.8 : 11/07/05-09:46:18 AM Z CST