Re: Optimized Print and Mat sizes.

From: SteveS ^lt;[email protected]>
Date: 06/18/05-04:05:07 PM Z
Message-id: <004201c57451$cae49c40$4802280a@VALUED65BAD02C>

Optimum use of the 32X40 is 13X20, as taught by Henry Guilpin through MPC
(Monterey Peninsula College) a Jr. College in Calif. Cut the 32 inch in
half, makes 2 16X40, then cut the 40 into three at 13 inches to get one inch
by 16 extra . . . in any case, you get six mats instead of four. Good matt
size for 5X7, 8X10 or 11X14

----- Original Message -----
From: "John Cremati" <>
To: <>
Sent: Friday, June 17, 2005 7:39 PM
Subject: Optimized Print and Mat sizes.

> One size of a stock sheet of mat board at the wholesale level is 32 x 40
> inches ........
> Optimum use of 32 x40 would be to cut it into 4 exact pieces of 16x20 in
> size... What would be a good size "minimum" boarder for this size mat?
> Regards,
> John Cremati
Received on Sat Jun 18 16:05:16 2005

This archive was generated by hypermail 2.1.8 : 07/07/05-11:30:54 AM Z CST