Re: contact frame question

From: John Brewer ^lt;[email protected]>
Date: 07/02/05-10:59:34 AM Z
Message-id: <011801c57f27$6c328730$6e842052@john3lfqb5rpyy>

Eric, I'm poor too! You could try E-bay. I have a collection of about 15
Victorian printing frames which collectively cost less than 25 (US$50).


----- Original Message -----
From: "Eric Maquiling" <>
To: <>
Sent: Saturday, July 02, 2005 5:25 PM
Subject: contact frame question

> Hi all,
> I am poor :) but I know I will eventually get an 8x10 or 11x14 contact
> frame
> later on when I get my 8x10 camera. However, I want to start practicing
> on
> smaller negs (6x6 and 6x9's and some Polaroid posi/negs).
> Could I just use my contact printing thing that I use to make contact
> sheets
> from 35mm and 120 film. You know those things with glass on a hinge and
> foam
> on the bottom. Trying to figure out how I can lift the glass and see the
> process happening (I'll be doing Van Dykes for now).
> TIA!
> --
> Eric
Received on Sat Jul 2 10:57:56 2005

This archive was generated by hypermail 2.1.8 : 08/25/05-05:31:51 PM Z CST