RE: Re: Print Clear Print on right side.

From: Eric Neilsen ^lt;[email protected]>
Date: 02/28/05-09:53:10 AM Z
Message-id: <200502281553.j1SFrCUT007229@spamf2.usask.ca>

Only having bought it in rolls, the white strip is always there. I did have
a problem with their test roll that they sent me. It was spun off another
roll and the white tape was not put on correctly and left the trailing edge
higher than the leading edge. I missed that and afterwards struggled with a
completely clogged black ink head. It took many KK2 cleaning and two days
of on again off again good nozzle checks. I just hope the print head is OK.

Eric Neilsen Photography
4101 Commerce Street
Suite 9
Dallas, TX 75226
http://e.neilsen.home.att.net
http://ericneilsenphotography.com
 
> -----Original Message-----
> From: Loris Medici [mailto:loris_medici@mynet.com]
> Sent: Monday, February 28, 2005 7:42 AM
> To: alt-photo-process-l@sask.usask.ca
> Subject: RE: Re: Print Clear Print on right side.
>
> Another check: one can print on the concave side. I first determine the
> concave side then do the wet finger test - to save time and also to save
> precious saliva ;)
>
> Regards,
> Loris.
>
> > -----Original Message-----
> > From: res1dvao@verizon.net [mailto:res1dvao@verizon.net]
> > Sent: Monday, February 28, 2005 3:32 PM
> > To: alt-photo-process-l@sask.usask.ca;
> > alt-photo-process-l@sask.usask.ca
> > Subject: Re: Re: Print Clear Print on right side.
> >
> >
> > I have never bought any with the white strip. It must be the
> > way they cut it down.
> >
> > And I now "lick n' stick' every time.
> >
> > George
> > >
> > > From: "Christina Z. Anderson" <zphoto@bellsouth.net>
> > > Date: 2005/02/28 Mon AM 04:50:07 GMT
> > > To: alt-photo-process-l@sask.usask.ca
> > > Subject: Re: Print Clear Print on right side.
> > >
> > > Yup; been there, done that. I always "lick n' stick"--wet
> > my finger
> > > and see
> > > if it sticks on the side I load into the printer.
> > > It's odd, some of the OHP has the white strip, some don't .
> > Not that the
> > > white strip would prevent loading wrong...but at least you
> > know the edge of
> > > it is on the wrong side.
> > > Chris
> > > ----- Original Message -----
> > > From: "Sandy King" <sanking@clemson.edu>
> > > To: <alt-photo-process-l@sask.usask.ca>
> > > Sent: Sunday, February 27, 2005 10:22 PM
> > > Subject: Print Clear Print on right side.
> > >
> > >
> > > > In the unlikely event there are other retarded
> > photographers on this
> > > > list
> > > > a word of advice. If you use the Photo Warehouse
> > Clearprint OHP always
> > > > double check and triple check before running it through
> > your Epson 2200.
> > > >
> > > > Gee Gawd, I printed a negative earlier this evening on the wrong
> > > > side and
> > > > it took me the better part of two hours to clean the
> > printers from all of
> > > > the dripping green ink. And even after I thought it was
> > clean the next
> > > > negative through had some light banding.
> > > >
> > > > I imagine that Pictorico would be about as bad if printed on the
> > > > wrong
> > > > side, but at least with it, and the Epson OHP, you have
> > this nice little
> > > > nick at the upper right corner that serves to orient it
> > correctly in the
> > > > printer.
> > > >
> > > > Sandy
Received on Mon Feb 28 09:53:34 2005

This archive was generated by hypermail 2.1.8 : 03/01/05-02:06:55 PM Z CST