RE: Pure Pt printing and solarization

From: Eric Neilsen ^lt;[email protected]>
Date: 12/01/05-11:57:39 PM Z
Message-id: <001d01c5f705$4dfbec60$51a0fea9@NEWDELL>

I replied earlier to this but never saw it on the list? Cor, Did you see it?
Never saw Jeff's posting?

 

Eric Neilsen Photography

4101 Commerce Street

Suite 9

Dallas, TX 75226

http://e.neilsen.home.att.net

http://ericneilsenphotography.com

 

  _____

From: Breukel, C. (HKG) [mailto:C.Breukel@lumc.nl]
Sent: Thursday, December 01, 2005 9:32 AM
To: alt-photo-process-l@sask.usask.ca
Subject: RE: Pure Pt printing and solarization

 

Hi Eric,

> -----Original Message-----
> From: Eric Neilsen [mailto:e.neilsen@worldnet.att.net]
>
> Cor, Unlike Palladium, Platinum is faster at low humidity.
> Printing at 70%
> is quite high for platinum. I suspect that you may have
> fogged your coating.

..the higher steps of The Stouffer stepwedge, as well as the sky in the
image were paperwite after processing, so I guess it isn't fogging..

> How high was your hairdryer away from the paper at medium?
> Wattage of?

..Wattage I do not know, the airstream was about 10 cm away from the paper,
the air warm, but you can keep your hand in it, it's not too hot (I was
actually surprised that the emulsion can take it, I saw no fogging).

After the drying step (1-2 min) the paper was immediatly exposed

>
> Did you print right away of let the paper rehumidify after
> drying? How long
> do you let the coating sit before you begin to dry?

..until the shine goes to matte (say 1-2 min)...

 

What is a ul?

..microliter, proper symbol is ml 1/1000 part of a ml (mililiter), I use
micropipets

Try
> adding an additional drop of metal and coat a larger area.

..why a larger area?

 

Thanks,

Cor

>
> Eric Neilsen Photography
> 4101 Commerce Street
> Suite 9
> Dallas, TX 75226
> http://e.neilsen.home.att.net
> http://ericneilsenphotography.com
>
Received on Thu Dec 1 23:57:54 2005

This archive was generated by hypermail 2.1.8 : 01/05/06-01:45:09 PM Z CST