RE: OT FLAT BEDS FOR LARGE NEGS

From: Bob Kiss ^lt;[email protected]>
Date: 09/04/04-07:09:25 AM Z
Message-id: <NIBBJBPKILANKFOAGNHEAEGJCPAA.bobkiss@caribsurf.com>

DEAR LIST,
        I have been out for the last two days and am just reading all of your
helpful info. THANKS to all who responded! I will first try scanning some
glass plate negs to make sure it is feasible and then pursue the suggestions
you made. I will advise whether I have any luck.
                                THANKS AGAIN!
                                        CHEERS!
                                                BOB

-----Original Message-----
From: Bob Kiss [mailto:bobkiss@caribsurf.com]
Sent: Thursday, September 02, 2004 9:47 AM
To: ALT PHO PROC.
Subject: OT FLAT BEDS FOR LARGE NEGS

DEAR LIST,
        Here is another strange request from Barbados. I am working on 2,000 glass
plate negatives up to 6 1/2 X 9 1/2 inches. I want to scan them and,
needless to say, they don't wrap around a scanning drum very well! Does
anyone know of a flat bed scanner that can take negs and transparencies up
to 8X10 inches? Or at least 6 1/2 X 9 1/2?
        As this is another of my strange OT requests please feel free to e-mail me
off list if you think this would not be of interest to others.
                                        CHEERS!
                                                BOB

Please check my website: www.bobkiss.com
Received on Sun Sep 5 08:39:34 2004

This archive was generated by hypermail 2.1.8 : 10/01/04-09:17:54 AM Z CST