Re: Problem with Ultrafine Clear Film

From: Mike Klemmer ^lt;[email protected]>
Date: 05/30/04-12:08:51 PM Z
Message-id: <001c01c44671$2a11e0c0$0200a8c0@downstairs>

Good idea :)

  ----- Original Message -----
  Sent: Sunday, May 30, 2004 10:46 AM
  Subject: Re: Problem with Ultrafine Clear Film

  Use Pictorico won't have these problems.

  In a message dated 5/30/04 8:29:40 AM, writes:

    I printed out another sample with the media rotated 90 degrees, and got an identical pattern. This time I also got a bunch of random ink smears as well.


    Roller marks seem to be the culprit here. I then used a wet finger to double check that I had printed on the right side. In the process I noticed that the wet finger wiped the printed ink right off the substrate! Also this film it is extremely sensitive to scratching like I've never seen on Pictorico.


    Someone double check me that I have the right film here. I am using the Ultrafine Inkjet Crystal Clear 4mil overlay film. Cat# 758-11172

  Mark Nelson
Received on Sun May 30 12:09:17 2004

This archive was generated by hypermail 2.1.8 : 06/04/04-01:20:54 PM Z CST