RE: hanging a show on brick

From: Don Bryant ^lt;[email protected]>
Date: 07/29/04-06:32:23 PM Z
Message-id: <>


At one gallery here in Atlanta that I helped hang galleries many times about
half of the wall space was brick wall.

We simply stretched and snapped a chalk line at the appropriate height,
marked the center lines for each frame, then used an electric drill with a
masonry bit to drill holes to accept a plastic insert and matching screw.

Of course this may be a problem if you aren't allowed to drill holes in the


> -----Original Message-----
> From: Christina Z. Anderson []
> Sent: Thursday, July 29, 2004 6:33 PM
> To:
> Subject: hanging a show on brick
> Hi all,
> What is the best way to hang a show on a brick wall (e.g. old
> warehouse, now converted) that is 50 ft long....there are beams about 13
> feet high that can be eye-bolted and wires strung down, but there has got
> to
> be a simpler way than screwing in 100 eye bolts and getting wires to hang
> evenly. Any ideas?
> Chris
Received on Thu Jul 29 18:32:27 2004

This archive was generated by hypermail 2.1.8 : 08/13/04-09:01:12 AM Z CST