[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[ale] USB device stops working
- Subject: [ale] USB device stops working
- From: dcorbin at imperitek.com (David Corbin)
- Date: Fri, 08 Mar 2002 22:02:53 -0500
all my stuff is built-in until the kernel... but, I did see this in the
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
hub.c: USB new device connect on bus1/1, assigned device number 2
usb.c: USB device 2 (vend/prod 0x547/0x2131) is not claimed by any
So, what's the next step?
Keith Hopkins wrote:
> David Corbin wrote:
>> I have SDDR-31 CompactFlash reader. It was working fine, and now it
>> is not.
>> mount: /dev/sda1 is not a valid block device
>> Any ideas? I'm not sure what to try next.
> Try rmmod / modprobe on the driver to reload it. check the output of
> dmesg to see if it recognized the device or gives an error. If so,
> what's the error?
> Lost in Tokyo,
This message has been sent through the ALE general discussion list.
See http://www.ale.org/mailing-lists.shtml for more info. Problems should be
sent to listmaster at ale dot org.