[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Sample config for cisco router

Hi Enno,

You can also mail your ipv6 specific
queries to <[email protected]>.

It may be of greater help for your 

Mathew Joseph

At 07:31 AM 11/20/00 +0100, Jean-Claude Christophe wrote:
>> Hi,
>> I'm currently preparing a presentation about IPv6. For the practical part,
>> there will be a either a 2503 (running c2500-p-mz.v6) or a 3620 (running
>> c3620-tipv6-mz.19990308) involved. I'm not able to find any sample
>> configuration on cco.
>> Anybody got any pointers?
>> Thanks & regards,
>Here is an example of cisco's configuration with an ipv6 tunnel over
>ipv6 unicast-routing
>interface Tunnel1
> ipv6 enable
> ipv6 address <IPv6>/127
> tunnel source Ethernet1/0
> tunnel destination <ipv4 addr>
> tunnel mode ipv6ip
>interface Ethernet1/1
> ipv6 enable
> ipv6 address <your IPv6 adress in your subnet>/<prefix>
>ipv6 route 3FFE::/16 Tunnel1
>It would be suffisent.
>Jean-Claude Christophe / [email protected] / France Telecom Transpac