[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
IPv6 tunnel & NAT
On 13:24(GMT) 02-05-00, Xavier Mertens wrote:
> I had a Linux box running an IPv6 tunnel to a Cisco.
> Now my box is behind a router with NAT!
> Is there a way to re-setup my tunnel to the Cisco even with the address
Short of scripting your config on the Cisco, not really. (Yuck. I didn't
just suggest that!)
A solution would be to move away from using the Cisco as a tunnel
endpoint and run something like CSELT's tunnel broker on a BSD box -
dynamically creating tunnels as and when you need them.
... or use a different transition technique.
1 cent spent,
iam: networks and distributed systems